MORE
HomeTown Mobility Aids
Click on the desired category to the left
- Rear View Mirror for mobility power scooters
- 1 mirror with adjustable head
- Compatible with Most Challenger, Drive and Pride Mobility New Generation Delta Tiller Scooters
- Screws into the Handlebar
- Right AND Left Hand Side Mount
- Compatible with most new generation Mobility Scooters with screw holes.
$31.99 - Telescoping Safety Flag from HomeTown Mobility
Product Description
The Telescoping Safety Flag increases your visibility while you enjoy your mobility independence. The flag can be easily mounted to most scooters, manual wheelchairs, and power-chairs.
Special Price $35.00 Regular Price $60.00 - Single Cane Holder for Mobility Scooter
- Single Metal Tube Cane Holder
- The holding Pin is provided with this Tube Style Cane/Crutch Holder
- This Tube Style Cane/Crutch Holder attaches to the universal accessory holder (1" square shape receiver) mounted on the back of your scooter seat.
- Please check that your scooter seat is equipped with the square accessory receiver before you order.
Special Price $58.99 Regular Price $75.00 - Oxygen E Tank holder for electric mobility scootersAbout the Product
- Fits E Cylinders
- Material: High quality, water resistant polyester
- Attaches to the back of your scooter or powerchair.
- Fits backs from 7-21 inches, ranging from the travel scooters to the high-back powerchairs
Special Price $100.00 Regular Price $198.00 - Mobility Scooter & Electric Wheelchair Cover - Regular SizeSize:Regular - Fits All Pride Mobility GoGo Scooters
Scooter Cover, Standard
33"Hx18"Wx55"L
400-denier nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.
Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten.
Note 3: Depending on your vehicle, cover may not fit over wheels.$130.00 - Mobility Scooter & Electric Wheelchair Cover - Large SizeSize:Regular - Fits All Pride Mobility Victory and Mid-Sized Scooters
Scooter Cover: Standard Fabric
33"Hx28"Wx55"L
400 - denier nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.
Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten.
Note 3: Depending on your vehicle, cover may not fit over wheels.$150.00 - Mobility Scooter & Electric Wheelchair Cover - Super Size StandardSize:Regular - Fits All Pride Mobility Victory and Mid-Sized Scooters
Scooter Cover: Standard Fabric
46"Hx33"Wx64"L
Heavy Duty nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.
Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten.
Note 3: Depending on your vehicle, cover may not fit over wheels.$175.00 - Weatherbreaker Base Model for Mobility Power Scooters
NOTE: Please call us with your make and model of scooter for proper selection of the type of weatherbreaker needed. Available in Teal, Blue, Red, and Gray
Product Description
The WeatherBreakerTM is a canopy that attaches to wheelchairs or scooters to protect you from the sun and rain and fits any wheelchair or scooter. The mounting kit will vary slightly depending on the make and model of your wheelchair or scooter. When you receive your canopy, it will include all the parts that you need to mount it to your vehicle. It will take you approximately 15-20 minutes to attach the two mounting poles to your wheelchair/scooter. These are black poles approximately 8" tall and less than an inch in width so they will not interfere with the normal operation of your wheelchair/scooter. Once the mounting poles are attached, then the canopy slips in and out. There are three models:.
Special Price $240.00 Regular Price $260.99 - Weatherbreaker Vented Model for Mobility Power Scooters
NOTE: Please call us with your make and model of scooter for proper selection of the type of weatherbreaker needed. Available in Teal, Blue, Red, and Gray
Product Description
The WeatherBreakerTM is a vented canopy that attaches to wheelchairs or scooters to protect you from the sun and rain and fits any wheelchair or scooter. The mounting kit will vary slightly depending on the make and model of your wheelchair or scooter. When you receive your canopy, it will include all the parts that you need to mount it to your vehicle. It will take you approximately 15-20 minutes to attach the two mounting poles to your wheelchair/scooter. These are black poles approximately 8" tall and less than an inch in width so they will not interfere with the normal operation of your wheelchair/scooter. Once the mounting poles are attached, then the canopy slips in and out. There are three models:.
$250.00