Scooter / Power Chair Parts and Accessories
Mobility Scooter Accessories For Sale
-
Single Cane Holder for Mobility Scooter- Single Metal Tube Cane Holder
- The holding Pin is provided with this Tube Style Cane/Crutch Holder
- This Tube Style Cane/Crutch Holder attaches to the universal accessory holder (1" square shape receiver) mounted on the back of your scooter seat.
- Please check that your scooter seat is equipped with the square accessory receiver before you order.
Special Price $58.99 Regular Price $75.00 -
Walker Holder Scooter Pouch For Electric ScootersProduct Description
The Scooter Walker Holder is a large pouch with straps that attaches to a scooter seat back for holding a basic style folding walker. This walker carrier is designed for stability on power mobility scooters or electric wheelchairs. People using a mobility scooter will find this walker holder allows them to easily carry a folding walker.To attach the walker holder to a scooter, slip the harness over the top of your seat back so that the fastening straps and bottom pocket hang from the seat back. Next, tighten the harness at the buckle. Place your folded walker down into the bottom pocket and then pull the fastening straps around your walker and buckle the straps. The Scooter Walker Holder is constructed of high quality water resistant fabric and is made in U.S.A. Scooter Walker Holder Features:Attaches to a scooter or electric wheelchair seat back.Securely holds a basic style folding walker.Scooter Walker Holder Specifications:Measures: 24 inches wide, 10 inches high, 2 inches deep.Material: High quality water resistant fabric.Made in: U.S.A.
$59.99 -
Pride Armrest Saddlebag Large for mobility scooters and power chairsPride's Armrest Saddlebag Large for scooters and power chairs is perfect for the person on the go. Stow your cell phone and so much more!Special Price $63.00 Regular Price $89.99 -
Double Cane / Crutch Holder for Mobility Scooters by Pride Mobility- The holding Pin is provided with this Tube Style Cane/Crutch Holder
- This Tube Style Cane/Crutch Holder attaches to the universal accessory holder (1" square shape receiver) mounted on the back of your scooter seat.
- Please check that your scooter seat is equipped with the square accessory receiver before you order.
Special Price $64.99 Regular Price $99.00 -
RAM X-Grip Cell Phone Holder Pride Mobility- Soft rubber grip keeps phone secure
- Easy to place and remove phone in spring-loaded mount
- Weight: 1 lbs.
- View All Specs
Special Price $69.99 Regular Price $100.00 -
Oxygen E Tank holder for electric mobility scootersAbout the Product- Fits E Cylinders
- Material: High quality, water resistant polyester
- Attaches to the back of your scooter or powerchair.
- Fits backs from 7-21 inches, ranging from the travel scooters to the high-back powerchairs
Special Price $70.00 Regular Price $98.00 -
Scooter Rear Basket For Pride Mobility Electric ScootersLarge square center support rear basket Attaches to the universal accessory holder 1"x1" in size located on the back of all Pride scooters Basket size: 15" Width X 10.25" Depth x 9.75" Height Heavy Duty Metal - Quick and Simple assembly is required
Special Price $75.00 Regular Price $99.99 -
Mobility Scooter & Electric Wheelchair Cover - Regular SizeSize:Regular - Fits All Pride Mobility GoGo ScootersScooter Cover, Standard
33"Hx18"Hx55"L
400-denier nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.
Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten.
Note 3: Depending on your vehicle, cover may not fit over wheels.$99.99 -
Mobility Scooter & Electric Wheelchair Cover - Regular Size & Heavy DutySize:Regular - Fits All Pride Mobility GoGo ScootersScooter Cover, Heavy Duty Fabric
33"Hx18"Hx55"L
Heavy Duty nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.
Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten.
Note 3: Depending on your vehicle, cover may not fit over wheels.$113.89 -
Mobility Scooter & Electric Wheelchair Cover - Large SizeSize:Regular - Fits All Pride Mobility Victory and Mid-Sized ScootersScooter Cover: Standard Fabric
33"Hx28"Hx55"L
400 - denier nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.
Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten.
Note 3: Depending on your vehicle, cover may not fit over wheels.$119.89
