Parts and Accessories

Mobility Scooter & Power Wheelchair Accessories

Desc

25 Items

per page
View as List Grid
  1. Online Shop for Golden Technologies Embossed Safety Flag | HomeTown Mobility
    Golden Technologies Embossed Safety Flag

    Product Description

    The Golden Technologies Embossed Folding Safety Flag increases your visibility while you enjoy your mobility independence. The flag can be easily mounted to most scooters, manual wheelchairs, and power-chairs if equipped with a receiver nib located on the anti-tip wheel in back or slide into the back seat pocket safety flag slot. When not in use, or when loading the scooter or wheelchair, the flag can be folded down below the individuals head. Large orange flag has a reflective strip for added safety.Folding Safety Flag Features:

    Special Price $35.00 Regular Price $50.00
  2. Online Shop for Pride Mobility Embossed Safety Flag with mount | HomeTown Mobility
    Pride Mobility Embossed Safety Flag with mount

    Product Description

    The Folding Safety Flag increases your visibility while you enjoy your mobility independence. The flag can be easily mounted to most scooters, manual wheelchairs, and power-chairs. When not in use, or when loading the scooter or wheelchair, the flag can be broken down and stowed. Large orange flag has a reflective strip for added safety. Safety Flag Features: Easily mounts to most scooters, manual wheelchairs, and powerchairs. Breaks down when not in use, or when getting in and out of vehicles. Safety Flag Specifications:Vinyl flag measures: 7 inches tall by 14.5 inches long.Fiberglass pole measures: 51 inches tall when fully extended.

    Special Price $35.00 Regular Price $48.00
  3. Online Shop for Walker Holder Scooter Pouch For Electric Scooters
    Walker Holder Scooter Pouch For Electric Scooters

    Product Description

    The Scooter Walker Holder is a large pouch with straps that attaches to a scooter seat back for holding a basic style folding walker. This walker carrier is designed for stability on power mobility scooters or electric wheelchairs. People using a mobility scooter will find this walker holder allows them to easily carry a folding walker.To attach the walker holder to a scooter, slip the harness over the top of your seat back so that the fastening straps and bottom pocket hang from the seat back. Next, tighten the harness at the buckle. Place your folded walker down into the bottom pocket and then pull the fastening straps around your walker and buckle the straps. The Scooter Walker Holder is constructed of high quality water resistant fabric and is made in U.S.A. Scooter Walker Holder Features:Attaches to a scooter or electric wheelchair seat back.Securely holds a basic style folding walker.Scooter Walker Holder Specifications:Measures: 24 inches wide, 10 inches high, 3 inches deep.Material: High quality water resistant polyester.Made in: U.S.A.

  4. Online Shop for Mobility Scooter & Electric Wheelchair Cover - Regular Size | HomeTown Mobility
    Mobility Scooter & Electric Wheelchair Cover - Regular Size
    Size:Regular - Fits All Pride Mobility GoGo Scooters

    Scooter Cover, Standard

    33"Hx18"Wx55"L


    400-denier nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.

    Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
    Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten. 
    Note 3: Depending on your vehicle, cover may not fit over wheels.

  5. Online Shop for Mobility Scooter & Electric Wheelchair Cover - Large Size | HomeTown Mobility
    Mobility Scooter & Electric Wheelchair Cover - Large Size
    Size:Regular - Fits All Pride Mobility Victory and Mid-Sized Scooters

    Scooter Cover: Standard Fabric

    33"Hx28"Wx55"L


    400 - denier nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.

    Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
    Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten. 
    Note 3: Depending on your vehicle, cover may not fit over wheels.

  6. Online Shop for Mobility Scooter & Electric Wheelchair Cover - Super Size Standard | HomeTown Mobility
    Mobility Scooter & Electric Wheelchair Cover - Super Size Standard
    Size:Regular - Fits All Pride Mobility Victory and Mid-Sized Scooters

    Scooter Cover: Standard Fabric 

    46"Hx33"Wx64"L


    Heavy Duty nylon with a urethane backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing outside.

    Note 1: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.
    Note 2: This is a standard cover; you will have grommets with a draw cord and cord lock to tighten. 
    Note 3: Depending on your vehicle, cover may not fit over wheels.

  7. Online Shop for Weatherbreaker Base Model for Mobility Power Scooters | HomeTown Mobility
    Weatherbreaker Base Model for Mobility Power Scooters

    NOTE: Please call us with your make and model of scooter for proper selection of the type of weatherbreaker needed.  Available in Teal, Blue, Red, and Gray

    Product Description

    The WeatherBreakerTM is a canopy that attaches to wheelchairs or scooters to protect you from the sun and rain and fits any wheelchair or scooter. The mounting kit will vary slightly depending on the make and model of your wheelchair or scooter. When you receive your canopy, it will include all the parts that you need to mount it to your vehicle. It will take you approximately 15-20 minutes to attach the two mounting poles to your wheelchair/scooter. These are black poles approximately 8" tall and less than an inch in width so they will not interfere with the normal operation of your wheelchair/scooter. Once the mounting poles are attached, then the canopy slips in and out. There are three models:.

    Special Price $240.00 Regular Price $260.99
  8. diestco weatherbreaker vented for sale from HomeTown Mobility for Less!
    Weatherbreaker Vented Model for Mobility Power Scooters

    NOTE: Please call us with your make and model of scooter for proper selection of the type of weatherbreaker needed.  Available in Teal, Blue, Red, and Gray

    Product Description

    The WeatherBreakerTM is a vented canopy that attaches to wheelchairs or scooters to protect you from the sun and rain and fits any wheelchair or scooter. The mounting kit will vary slightly depending on the make and model of your wheelchair or scooter. When you receive your canopy, it will include all the parts that you need to mount it to your vehicle. It will take you approximately 15-20 minutes to attach the two mounting poles to your wheelchair/scooter. These are black poles approximately 8" tall and less than an inch in width so they will not interfere with the normal operation of your wheelchair/scooter. Once the mounting poles are attached, then the canopy slips in and out. There are three models:.

  9. Online Shop for Weatherbreaker Max Protection Model for Mobility Power Scooters | HomeTown Mobility
    Weatherbreaker Max Protection Model for Mobility Power Scooters

    NOTE: Please call us with your make and model of scooter for proper selection of the type of weatherbreaker needed.  Available in Teal, Blue, Red, and Gray

    Product Description

    The WeatherBreakerTM is a vented canopy that attaches to wheelchairs or scooters to protect you from the sun and rain and fits any wheelchair or scooter. The mounting kit will vary slightly depending on the make and model of your wheelchair or scooter. When you receive your canopy, it will include all the parts that you need to mount it to your vehicle. It will take you approximately 15-20 minutes to attach the two mounting poles to your wheelchair/scooter. These are black poles approximately 8" tall and less than an inch in width so they will not interfere with the normal operation of your wheelchair/scooter. Once the mounting poles are attached, then the canopy slips in and out. There are three models:.

    Special Price $325.00 Regular Price $360.00
Desc

25 Items

per page
View as List Grid
To Top
Enter your email address to see exclusive offers:

Limited Time Offers - Order Online or Call Our

ProductExperts

at

1-877-928-5388